If you’re one of the millions of people who bought a new Garmin GPS unit because it has a built-in GPS module, you probably have a speedometer that you can use to measure your speed.
The device has to be connected to a GPS receiver, and you can’t use it to measure distance on your own.
You can also’t use the GPS module to detect objects, like your car’s speed.
That’s because Garmin’s Speedometer app doesn’t allow for this.
But it does allow you to download the free GPS Speedo app that works with the GPS Module.
So you can download the Speedometer software and then install it on your Raspberry Pi.
The free app allows you to use the Speedo device to measure distances up to about 10 feet.
If you need to download and install another GPS module from Garmin, that can be done easily.
Just follow these instructions: Download the Garmin Speedo software, then copy and paste the code in the terminal on your computer.
For the Garmin app, paste in the code shown above.
You’ll get a message asking if you want to install the Garmin GPS Speed module.
Click “Yes” and you’re ready to go.
This tutorial shows how to install Garmin Speedometer.
First, connect your Garmin to your computer and open up the Garmin Developer Tools (right-click the Garmin logo, then click the gear icon at the top of the window).
Next, select Connect to the Internet.
This will give you the address for your Garmin server.
On your Garmin device, click the settings icon at top left and select the option that says Open Settings.
You should see a new menu appear.
Here, select Open Settings to connect your device to the server.
Select the Settings tab and then click Connect to.
The GPS module on your Garmin will connect to the Garmin server and start running.
Next, you’ll want to open the Speedometers.xcsh file.
Open the Speedoscene file on your SD card, then navigate to the Speedscene folder.
Copy the SpeedScene.xcslx file to the same folder as your Garmin module.
The Speedscenes folder will contain a couple of files: a .xcsh configuration file that you’ll need to change, and a .csv file that tells the GPS to send the data to your Garmin.
To do this, go to the Configuration section in the Speed Scene app and copy the file named SpeedScenes.xcsc.
Change the line: “Your device name should be /u/davidhills/raspberrypi_gps/”, replace your device name with your own and hit Save.
Open up the SpeedScheme.xcsw file in the Garmin Module folder and change the line, “GPS module name should end in /u/” to your own, then hit Save to close.
Now, open up your Garmin Device Manager, and select your Garmin from the left menu.
You may have to scroll down a bit to find the GPS device you want.
To connect to your GPS module you’ll have to navigate to Settings -> GPS.
Click on the Settings icon in the top-left corner and select Connect.
You will see a dialog box that looks something like this: The device you’re connecting to should now appear on the screen.
Click the Connect button to begin the connection process.
The first time you connect to a Garmin device (or device that has been previously connected to your device), you’ll see a message that reads, “The Garmin Speed module is now ready to connect to.”
You can connect to that Garmin module as many times as you like.
To disconnect from the Garmin module, hit the menu icon on the top left corner of the screen, select Unplug, and then close the menu.
If your device is connected to multiple devices, you can choose each of them to be disconnected from the same device.
If there’s only one Garmin module connected to the device, you will need to do this one at a time.
In the Speed module, select the Speed modules.xcsv file you copied earlier.
If the file is empty, click OK to close the window.
The last step is to connect the GPS Speed Module.
You must be logged in to the system to connect.
To find your Garmin account, open Garmin Settings.
The next time you log in, select Settings -> Devices.
Select your Garmin, then select your Speed Module from the top menu.
When you’re finished, close the Garmin Settings window.
Open your Garmin app on your phone or tablet.
You now have access to the speedometer on your device.
When your device has connected, you should see the Speed Speed module icon on your screen.